Please allow me to introduce myself: Torch for R

Packages/Releases Torch R

Today, we are excited to introduce torch, an R package that allows you to use PyTorch-like functionality natively from R. No Python installation is required: torch is built directly on top of libtorch, a C++ library that provides the tensor-computation and automatic-differentiation capabilities essential to building neural networks.

Sigrid Keydana (RStudio)https://www.rstudio.com/
09-29-2020

Last January at rstudio::conf, in that distant past when conferences still used to take place at some physical location, my colleague Daniel gave a talk introducing new features and ongoing development in the tensorflow ecosystem. In the Q&A part, he was asked something unexpected: Were we going to build support for PyTorch? He hesitated; that was in fact the plan, and he had already played around with natively implementing torch tensors at a prior time, but he was not completely certain how well “it” would work.

“It,” that is an implementation which does not bind to Python Torch, meaning, we don’t install the PyTorch wheel and import it via reticulate. Instead, we delegate to the underlying C++ library libtorch for tensor computations and automatic differentiation, while neural network features – layers, activations, optimizers – are implemented directly in R. Removing the intermediary has at least two benefits: For one, the leaner software stack means fewer possible problems in installation and fewer places to look when troubleshooting. Secondly, through its non-dependence on Python, torch does not require users to install and maintain a suitable Python environment. Depending on operating system and context, this can make an enormous difference: For example, in many organizations employees are not allowed to manipulate privileged software installations on their laptops.

So why did Daniel hesitate, and, if I recall correctly, give a not-too-conclusive answer? On the one hand, it was not clear whether compilation against libtorch would, on some operating systems, pose severe difficulties. (It did, but difficulties turned out to be surmountable.)1 On the other, the sheer amount of work involved in re-implementing – not all, but a big amount of – PyTorch in R seemed intimidating. Today, there is still lots of work to be done (we’ll pick up that thread at the end), but the main obstacles have been ovecome, and enough components are available that torch can be useful to the R community. Thus, without further ado, let’s train a neural network.

You’re not at your laptop now? Just follow along in the companion notebook on Colaboratory.

Installation

torch

Installing torch is as straightforward as typing

install.packages("torch")

This will detect whether you have CUDA installed, and either download the CPU or the GPU version of libtorch. Then, it will install the R package from CRAN. To make use of the very newest features, you can install the development version from GitHub:

devtools::install_github("mlverse/torch")

To quickly check the installation, and whether GPU support works fine (assuming that there is a CUDA-capable NVidia GPU), create a tensor on the CUDA device:

torch_tensor(1, device = "cuda")
torch_tensor 
 1
[ CUDAFloatType{1} ]

If all our hello torch example did was run a network on, say, simulated data, we could stop here. As we’ll do image classification, however, we need to install another package: torchvision.

torchvision

Whereas torch is where tensors, network modules, and generic data loading functionality live, datatype-specific capabilities are – or will be – provided by dedicated packages. In general, these capabilities comprise three types of things: datasets, tools for pre-processing and data loading, and pre-trained models.

As of this writing, PyTorch has dedicated libraries for three domain areas: vision, text, and audio. In R, we plan to proceed analogously – “plan,” because torchtext and torchaudio are yet to be created. Right now, torchvision is all we need:

devtools::install_github("mlverse/torchvision")

And we’re ready to load the data.

Data loading and pre-processing

The list of vision datasets bundled with PyTorch is long, and they’re continually being added to torchvision.

The one we need right now is available already, and it’s – MNIST? … not quite: It’s my favorite “MNIST dropin,” Kuzushiji-MNIST (Clanuwat et al. 2018). Like other datasets explicitly created to replace MNIST, it has ten classes – characters, in this case, depicted as grayscale images of resolution 28x28.

Here are the first 32 characters:

Kuzushiji MNIST.

Figure 1: Kuzushiji MNIST.

Dataset

The following code will download the data separately for training and test sets.

train_ds <- kmnist_dataset(
  ".",
  download = TRUE,
  train = TRUE,
  transform = transform_to_tensor
)

test_ds <- kmnist_dataset(
  ".",
  download = TRUE,
  train = FALSE,
  transform = transform_to_tensor
)

Note the transform argument. transform_to_tensor takes an image and applies two transformations: First, it normalizes the pixels to the range between 0 and 1. Then, it adds another dimension in front. Why?

Contrary to what you might expect – if until now, you’ve been using keras – the additional dimension is not the batch dimension. Batching will be taken care of by the dataloader, to be introduced next. Instead, this is the channels dimension that in torch, is found before the width and height dimensions by default.

One thing I’ve found to be extremely useful about torch is how easy it is to inspect objects. Even though we’re dealing with a dataset, a custom object, and not an R array or even a torch tensor, we can easily peek at what’s inside. Indexing in torch is 1-based, conforming to the R user’s intuitions. Consequently,

train_ds[1]

gives us the first element in the dataset, an R list of two tensors corresponding to input and target, respectively. (We don’t reproduce the output here, but you can see for yourself in the notebook.)

Let’s inspect the shape of the input tensor:

train_ds[1][[1]]$size()
[1]  1 28 28

Now that we have the data, we need someone to feed them to a deep learning model, nicely batched and all. In torch, this is the task of data loaders.

Data loader

Each of the training and test sets gets their own data loader:

train_dl <- dataloader(train_ds, batch_size = 32, shuffle = TRUE)
test_dl <- dataloader(test_ds, batch_size = 32)

Again, torch makes it easy to verify we did the correct thing. To take a look at the content of the first batch, do

train_iter <- train_dl$.iter()
train_iter$.next()

Functionality like this may not seem indispensable when working with a well-known dataset, but it will turn out to be very useful when a lot of domain-specific pre-processing is required.

Now that we’ve seen how to load data, all prerequisites are fulfilled for visualizing them. Here is the code that was used to display the first batch of characters, above:

par(mfrow = c(4,8), mar = rep(0, 4))
images <- train_dl$.iter()$.next()[[1]][1:32, 1, , ] 
images %>%
  purrr::array_tree(1) %>%
  purrr::map(as.raster) %>%
  purrr::iwalk(~{plot(.x)})

We’re ready to define our network – a simple convnet.

Network

If you’ve been using keras custom models (or have some experience with PyTorch), the following way of defining a network may not look too surprising.

You use nn_module() to define an R6 class that will hold the network’s components. Its layers are created in initialize(); forward() describes what happens during the network’s forward pass. One thing on terminology: In torch, layers are called modules, as are networks. This makes sense: The design is truly modular in that any module can be used as a component in a larger one.

net <- nn_module(
  
  "KMNIST-CNN",
  
  initialize = function() {
    # in_channels, out_channels, kernel_size, stride = 1, padding = 0
    self$conv1 <- nn_conv2d(1, 32, 3)
    self$conv2 <- nn_conv2d(32, 64, 3)
    self$dropout1 <- nn_dropout2d(0.25)
    self$dropout2 <- nn_dropout2d(0.5)
    self$fc1 <- nn_linear(9216, 128)
    self$fc2 <- nn_linear(128, 10)
  },
  
  forward = function(x) {
    x %>% 
      self$conv1() %>%
      nnf_relu() %>%
      self$conv2() %>%
      nnf_relu() %>%
      nnf_max_pool2d(2) %>%
      self$dropout1() %>%
      torch_flatten(start_dim = 2) %>%
      self$fc1() %>%
      nnf_relu() %>%
      self$dropout2() %>%
      self$fc2()
  }
)

The layers – apologies: modules – themselves may look familiar. Unsurprisingly, nn_conv2d() performs two-dimensional convolution; nn_linear() multiplies by a weight matrix and adds a vector of biases. But what are those numbers: nn_linear(128, 10), say?

In torch, instead of the number of units in a layer, you specify input and output dimensionalities of the “data” that run through it. Thus, nn_linear(128, 10) has 128 input connections and outputs 10 values – one for every class. In some cases, such as this one, specifying dimensions is easy – we know how many input edges there are (namely, the same as the number of output edges from the previous layer), and we know how many output values we need. But how about the previous module? How do we arrive at 9216 input connections?

Here, a bit of calculation is necessary. We go through all actions that happen in forward() – if they affect shapes, we keep track of the transformation; if they don’t, we ignore them.

So, we start with input tensors of shape batch_size x 1 x 28 x 28. Then,

Now you’ll be thinking, – what if my network is more complicated? Calculations could become pretty cumbersome. Luckily, with torch’s flexibility, there is another way. Since every layer is callable in isolation, we can just … create some sample data and see what happens!

Here is a sample “image” – or more precisely, a one-item batch containing it:

x <- torch_randn(c(1, 1, 28, 28))

What if we call the first conv2d module on it?

conv1 <- nn_conv2d(1, 32, 3)
conv1(x)$size()
[1]  1 32 26 26

Or both conv2d modules?

conv2 <- nn_conv2d(32, 64, 3)
(conv1(x) %>% conv2())$size()
[1]  1 64 24 24

And so on. This is just one example illustrating how torchs flexibility makes developing neural nets easier.

Back to the main thread. We instantiate the model, and we ask torch to allocate its weights (parameters) on the GPU:

model <- net()
model$to(device = "cuda")

We’ll do the same for the input and output data – that is, we’ll move them to the GPU. This is done in the training loop, which we’ll inspect next.

Training

In torch, when creating an optimizer, we tell it what to operate on, namely, the model’s parameters:

optimizer <- optim_adam(model$parameters)

What about the loss function? For classification with more than two classes, we use cross entropy, in torch: nnf_cross_entropy(prediction, ground_truth):

# this will be called for every batch, see training loop below
loss <- nnf_cross_entropy(output, b[[2]]$to(device = "cuda"))

Unlike categorical cross entropy in keras , which would expect prediction to contain probabilities, as obtained by applying a softmax activation, torch’s nnf_cross_entropy() works with the raw outputs (the logits). This is why the network’s last linear layer was not followed by any activation.

The training loop, in fact, is a double one: It loops over epochs and batches. For every batch, it calls the model on the input, calculates the loss, and has the optimizer update the weights:

for (epoch in 1:5) {

  l <- c()

  coro::loop(for (b in train_dl) {
    # make sure each batch's gradient updates are calculated from a fresh start
    optimizer$zero_grad()
    # get model predictions
    output <- model(b[[1]]$to(device = "cuda"))
    # calculate loss
    loss <- nnf_cross_entropy(output, b[[2]]$to(device = "cuda"))
    # calculate gradient
    loss$backward()
    # apply weight updates
    optimizer$step()
    # track losses
    l <- c(l, loss$item())
  })

  cat(sprintf("Loss at epoch %d: %3f\n", epoch, mean(l)))
}
Loss at epoch 1: 1.795564
Loss at epoch 2: 1.540063
Loss at epoch 3: 1.495343
Loss at epoch 4: 1.461649
Loss at epoch 5: 1.446628

Although there is a lot more that could be done – calculate metrics or evaluate performance on a validation set, for example – the above is a typical (if simple) template for a torch training loop.

The optimizer-related idioms in particular

optimizer$zero_grad()
# ...
loss$backward()
# ...
optimizer$step()

you’ll keep encountering over and over.

Finally, let’s evaluate model performance on the test set.

Evaluation

Putting a model in eval mode tells torch not to calculate gradients and perform backprop during the operations that follow:

model$eval()

We iterate over the test set, keeping track of losses and accuracies obtained on the batches.

test_losses <- c()
total <- 0
correct <- 0

coro::loop(for (b in test_dl) {
  output <- model(b[[1]]$to(device = "cuda"))
  labels <- b[[2]]$to(device = "cuda")
  loss <- nnf_cross_entropy(output, labels)
  test_losses <- c(test_losses, loss$item())
  # torch_max returns a list, with position 1 containing the values 
  # and position 2 containing the respective indices
  predicted <- torch_max(output$data(), dim = 2)[[2]]
  total <- total + labels$size(1)
  # add number of correct classifications in this batch to the aggregate
  correct <- correct + (predicted == labels)$sum()$item()
})

mean(test_losses)
[1] 1.53784480643349

Here is mean accuracy, computed as proportion of correct classifications:

test_accuracy <-  correct/total
test_accuracy
[1] 0.9449

That’s it for our first torch example. Where to from here?

Learn

To learn more, check out our vignettes on the torch website. To begin, you may want to check out these in particular:

If you have questions, or run into problems, please feel free to ask on GitHub or on the RStudio community forum.

We need you

We very much hope that the R community will find the new functionality useful. But that’s not all. We hope that you, many of you, will take part in the journey.

There is not just a whole framework to be built, including many specialized modules, activation functions, optimizers and schedulers, with more of each being added continuously, on the Python side.

There is not just that whole “bag of data types” to be taken care of (images, text, audio…), each of which demand their own pre-processing and data-loading functionality. As everyone knows from experience, ease of data preparation is a, perhaps the essential factor in how usable a framework is.

Then, there is the ever-expanding ecosystem of libraries built on top of PyTorch: PySyft and CrypTen for privacy-preserving machine learning, PyTorch Geometric for deep learning on manifolds, and Pyro for probabilistic programming, to name just a few.

All this is much more than can be done by one or two people: We need your help! Contributions are greatly welcomed at absolutely any scale:

One component that should be of special interest to the R community is Torch distributions, the basis for probabilistic computation. This package is built upon by e.g. the aforementioned Pyro; at the same time, the distributions that live there are used in probabilistic neural networks or normalizing flows.

To reiterate, participation from the R community is greatly encouraged (more than that – fervently hoped for!). Have fun with torch, and thanks for reading!

Clanuwat, Tarin, Mikel Bober-Irizar, Asanobu Kitamoto, Alex Lamb, Kazuaki Yamamoto, and David Ha. 2018. “Deep Learning for Classical Japanese Literature.” December 3, 2018. https://arxiv.org/abs/cs.CV/1812.01718.

  1. In a nutshell, Javier had the idea of wrapping libtorch into lantern, a C interface to libtorch, thus avoiding cross-compiler issues between MinGW and Visual Studio.↩︎

References

Reuse

Text and figures are licensed under Creative Commons Attribution CC BY 4.0. The figures that have been reused from other sources don't fall under this license and can be recognized by a note in their caption: "Figure from ...".

Citation

For attribution, please cite this work as

Keydana (2020, Sept. 29). Posit AI Blog: Please allow me to introduce myself: Torch for R. Retrieved from https://blogs.rstudio.com/tensorflow/posts/2020-09-29-introducing-torch-for-r/

BibTeX citation

@misc{keydanaintroducingtorchforR,
  author = {Keydana, Sigrid},
  title = {Posit AI Blog: Please allow me to introduce myself: Torch for R},
  url = {https://blogs.rstudio.com/tensorflow/posts/2020-09-29-introducing-torch-for-r/},
  year = {2020}
}